Call Today Toll Free: 1-800-377-3244
Email your requirement: sales@coilws.com

Helical Winding Technology Output Inductors

Industrial Type High Current Filter Inductors for Differential Mode, Boost Power Factor Correction and Welding Machines.
Height of 0.8" and Current Rating to 250 Amps.
Designed with Kool Mu/Sendust or Iron Powder Cores.



FEATURES:
  • Can achieve up to 60% more energy storage, up to 5 mJ
  • Use of Flat Helix winding to reduce DCR, lower copper loss, reduce size, even out heat dissipation and achieve up to 80% of copper fill factor
  • Helix coils are self supported with no bobbins or coil forms
  • Designed using KoolMu/Sendust cores for extreme high temperature operations of 200 deg C
  • Also available using gapped and un-gapped Micrometal's 40, 52 and 8/90 mix Iron Powder Cores for high saturation flux and lower cost.
  • Designed for commercial, industrial and military application
  • Operating temperature range: -55 deg C to +200 deg C
  • Inductance values : 1 uH to 80 uH
  • Current rating : Up to 250 Amps
  • Low Cost mass producible design
  • Background on Helical Winding Output Inductors.

SPECIFICATIONS

Click the button to see examples of our custom wound products. We wind anything to meet your needs.

KoolMu/Sendust E-cores are for 200 deg C operations

Iron Powder E-cores are for 100 deg C operations
Please see table below and Engineering Drawings (.PDF) for dimensions

IMPORTANT
1) No tooling or set up fees required for standard parts
2) Minimum order : 1 Piece. Samples available for large OEMs
3) Typical Delivery: 2 to 4 weeks

 


CONSTRUCTION INFORMATION

Please see pdf files for details.
See link below for some sample PDF files.
E70340-004
E70340-013

Part Numbering

E70340-004

E70340 : Helical Winding Series.
004 : Part Number.

Notes:
1
) The prices shown below are for low volume quantity. Please call  800-377-3244 or
email sales@coilws.com for larger volume OEM pricing.
2
) Our large OEM pricing is extremely competitive. We will meet or beat any competitors prices with better deliveries
3
) Custom designs are available to meet any of your requirements. Please contact us
4
) The data shown below can be sorted by clicking each column header.Click once again to sort in reverse order.

5) Rated Current is based on a 60 deg C temperature rise at an ambient temperature of 40 deg C. KoolMu/Sendust versions can operate to over 200 deg C. Iron Powder cores may exhibit thermal aging and that limits the operating tempertaure to 100 deg C.

6) Helical wire used on both KoolMu/Sendust and Iron Powder versions has Kapton insulation and can withstand a temperature of 220 deg C.

 

Number,Inductance
@ No Bias,Current
Rating,Inductance
at full
Current
Rating,DCR
Max,Dimension
Length x Width x Height
mm,Core Material"; $ColumnField = "partnumber,inductance,data1,data2,data3,data4,data5,data6,data7,data8"; $ItemType = "HWT_Series"; include( '../admin/productlist.php' ); ?>


CWS delivers the finest in surface mount inductors and standard inductors, power transformers, Common Mode Chokes, Ceramic Chip Inductors and Wire Wound Chip Inductors. CWS can supply all of your filtering needs as well, including EMI Filters, RFI Filters, LC Filter Inductors, and Common Mode Filters.
BACK to the PREVIOUS page


Your comments and suggestions are important to us, please feel free to email us at : sales@coilws.com
Call us Toll Free: 1- 800 - 377- 3244

Copyright © 2004, Coilws.com, Inc
Updated Nov 3, 2004