Output Power Inductor Dimensions

Call Today Toll Free: 1-800-377-3244
Email your requirement: sales@coilws.com
Coil Winding Specialist

Output Power Inductor Dimensions

"We will wind anything for you"

If you can conceptualize it, draw it, sketch it or describe it, we can wind it for you. Of course, if you have an engineering print of it, we can serve you even better.

Dimensions for OPC Series of Output Power Inductor

All units shown are in mm ( 1 inch = 25.4mm)

OPC Series	X + - 0.25 (mm)	Y + - 0.25 (mm)	Nominal Lead Diameter (mm)
OPC-1-xx-yy	20.3	10.2	1.37
OPC-2-xx-yy	22.8	15.2	1.37
OPC-3-xx-yy	30.5	17.8	1.37

Example:
OPC-1-180-1.5 will have all the X , Y and lead diameter dimension shown in
OPC-1-xx-yy above.

The X, Y and Lead diameters are based on industry's standard bobbin or headers available from bobbins and headers suppliers in the U.S.

BACK to top of this page.

Need Power Magnetics? Then look no more! CWS delivers the finest in surface mount inductors, standard inductors, Power Transformers, Common Mode Chokes, Ceramic Chip Inductors and Wire Wound Chip Inductors. CWS can supply all of your filtering needs as well, including EMI Filters, RFI Filters, LC Filter Inductors, and Common Mode Filters. From Transmission Line Transformers to power transformers, CWS is the source to call!
We have direct crosses to all major manufacturers including Toko, CoilCraft, Coiltronics, Tokin, J.W. Miller, Arnold, Siemens, TDK, Gowanda, Taiyo Yuden and more! Call for details!