Please use side menu if you cannot use dropdown boxes, or the header boxes
CAGE Code: 5DME2
ITAR Registration Code: M28889

- July 13th 2020 -
Call: 1 (800) 377-3244
We Are Open Monday to Friday 8 A.M. - 5 P.M. (Pacific Time)
E-mail your questions and requirements at:

*Please contact us for available stock.
Stock quantity of zero may be reflected as it is not implemented yet.

MPP Series

MPP cores used for low loss and high temperature application Capable of handling very high DC bias current with minimal inductance roll off. Vertical or Horizontal through hole mount with pre-tinned leads that can be directly soldered to PCB Customer specific specifications ( size, inductance, current) and we built to meet these specs. Inductance range from: 10 nH to 200 uH Current range to 10 Amps to 200 Amps Custom designs available

1) No tooling or set up fees required for standard parts
2) Samples available for large OEMs
3) Typical Delivery for Samples: 1-2 weeks

) The prices shown below are for low volume quantity. Please call 800-377-3244 or
email for larger volume OEM pricing.
) Our large OEM pricing is extremely competitive. We will meet or beat any competitors prices with better deliveries
) Custom designs are available to meet any of your requirements. Please contact us
) The data shown below can be sorted by clicking each column header.Click once again to sort in reverse order.
5) Rated Current is based on a 40 deg C temperature rise at an ambient temperature of 95 deg C.
MPP cores does not exhibit thermal run-away, so a temperature rise of 40 deg C is acceptable. The core and the wire's insulation can withstand a temperature of 200 deg C.


MPP Series High Current Power Inductors.
Multi Lead Through Hole Mounting Construction

  • CUSTOM DESIGNS to meet your specific requirements
  • Designed using high saturation and high temperature stability MPP or "MolyPermalloy Powder Cores" with distributed air-gap
  • Excellent electromagnetic shielding due to toroidal design
  • Designed for commercial, industrial and military application
  • Operating temperature range: -55 deg C to +95 deg C
  • Inductance values from 10 nH to 200 uH
  • Current rating from 10 Amps to 100 Amps

  Part Number Inductance Current
at full
on hand
MP330-100M-60AV 10.00 uH 60 Amps 4.7 uH 1.0 milli ohms 2 $20.00
Buy Now
MP270-100M-50AH 10.00 uH 50 Amps 10.0 uH 1.5 milli ohms 27 $18.50
Buy Now
MP330-6R0M-60AV 6.00 uH 60 Amps 3.3 uH 1.0 milli ohms 2 $20.00
Buy Now
MP330-4R7M-60AV 4.70 uH 60 Amps 3.8 uH 1.0 milli ohms 2 $20.00
Buy Now

Disclaimer: Coil Winding Specialist, Inc., its affiliates, agents, and employees acting on behalf of Coil Winding Specialist, Inc. (collectively, CWS) disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. CWS reserves the right at any time and from time to time to make changes to design, technical specification, or construction of any product listed on this website without notice. CWS also reserves the right to discontinue or limit sale of any product or service available throughout this website on temporary or permanently basis without notice. CWS highly recommends customers not to use its products offered on this website for inappropriate use and applications. Products should be tested for its suitability by prospective customers in all possible applications and conditions. Customers using or selling CWS products for use in other than recommended applications do so entirely at their own risk and agree to fully indemnify CWS from any damages arising or resulting from such use or sale.

WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go

Any Comments, Suggestions or Questions? Contact us! Email:
CWS 353 West Grove Ave. Orange, California 92865
Call us Toll Free: 1-800-679-3184 or 1 (800) 377-3244

Tel: (714) 279-9010, Fax: (714) 279-9482

Copyright 2008, Coil Winding Specialist, Inc
Updated July, 2013

CAGE Code: 5DME2(Registered with