Planar Output Inductor using gapped low loss power ferrite core
Capable of handling very high DC bias current with low inductance roll off.
Helical Wound Bobbinless Surface Mount.
Co-planar SMT pre-tinned leads for directly soldered to PCB
Available as bulk packaging or in tape and reel packaging
Inductance ranges: 0.9 uH, 1.0 uH and 2 uH
DC Current Rating: 70 Amps and 50 Amps
Custom designs for other inductances and current rating available. Please contact us.
|
CWS-3XXXX Series : 20Amps to 70 Amps High Current
Surface Mount Power Inductors - Planar Output Choke - Planar Inductor.
Low Cost, Helical Winding, Gapped Ferrite Construction
|
FEATURES:
- Low Cost Planar
Output Choke or Planar Inductor
- Gapped PQ20
and RM10 power ferrite for low loss
- Designed for
commercial, industrial and military application
- Operating temperature
range: -55 deg C to +110 deg C
- Storage temperature
range: -60 deg C to +125 deg C
- Inductance values
: 0.4 uH to 4.5 uH
- Current rating
: 70A, 60A, 50A, 35A, 25A, 20A
- DC
Resistance: As low as 0.6 milli-ohms
- Hi-Pot:
300 Vrms, helix winding to core
- Dimension:
PQ20 Types 0.82" x 0.87" max. Ht: 0.225" to
0.28"
RM10 Types:
1.10" x 1.05" max. Ht: 0.28" to 0.36"
- Surface Mount
Leads: See PDF drawings
|
|
|
|
|
Notes:
1 ) The prices
shown below are for low volume quantity. Please call 800-377-3244
or
email sales@coilws.com for larger
volume OEM pricing.
2 ) Our large
OEM pricing is extremely competitive. Very high volume pricing is under $1 each, tape and reel packaging. We will meet or beat any competitors
prices with better deliveries
3
) Custom designs
are available to meet any of your requirements. Please contact us
4
) The data shown below can be sorted by clicking each column header.Click once again to sort in reverse order.
5) Rated current is based on a 40 deg C temp rise above the ambient, up to a max component temp of 110 deg C. Ferrite curie temp is over 200 deg C and wire insulation is rated at 200 deg C.
6) Theta JA, Theta JC, Rja and Rjb used in simulation softwares are only applicable for active devices, such as integrated circuits, etc. Inductors such as this CWS series do not use any semiconductor material and do not have same potential failure modes. The junction temperature gradient in CWS inductors are almost zero since it is a continuous copper wires.
|
