| |
CAC Series - Air Coil Inductor
Helical or Edge Wound Air Coils.
Capable of handling very high current and High Temperature.
Through hole mount with pre-tinned leads that can be directly soldered to PCB
The parts listed below are CWS standard off the shelf parts. For custom requirement, please specify the specs (size, inductance, current) and we built to meet the specs.
Insulation rating is 200 deg C.
|
CAC
Series High Current Air Wound Inductors.
Through Hole Mounting Construction
|
FEATURES:
- Designed using
high temperature rated helical or edge wound conductor
- Custom designs available with tooling charge
- Designed for
commercial, industrial and military application
- Pre-tinned leads for PCB through hole mounting
- Inductance values
from 0.5 uH to 20 uH
- Current rating
from 30 Amps to 160 Amps
- Temperature Rating:
-55 deg C to +180 Deg C
- Custom designs
are available to meet your specific requirements
IMPORTANT
- No tooling or set up fees required for standard parts
- FREE Samples available for large OEMs
|
|
|
|
|
Notes:
1)
The prices
shown below are for low volume quantity. Please call 800-377-3244
or
email sales@coilws.com for larger
volume OEM pricing.
2) Our large
OEM pricing is extremely competitive. We will meet or beat any competitors
prices with better deliveries
3)
The data shown below can be sorted by clicking each column header.Click once again to sort in reverse order.
4) "Inductance at 1 Khz" ( 2nd column from left in table below ) is the inductance measured at zero or very low DC bias current.
5) "Current Rating" ( 3rd column from left in table below ) is based on a 40 deg C temperature rise at an ambient
temperature of 90 deg C. This is the DC bias current through the inductor that will cause the inductor will reach a max. temp. rise of 40 deg C. above ambient with NO AIR FLOW.
|
|
|
Disclaimer:
Coil Winding Specialist, Inc., its affiliates, agents, and employees acting on behalf of Coil Winding Specialist, Inc. (collectively, CWS) disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.
CWS reserves the right at any time and from time to time to make changes to design, technical specification, or construction of any product listed on this website without notice. CWS also reserves the right to discontinue or limit sale of any product or service available throughout this website on temporary or permanently basis without notice.
CWS highly recommends customers not to use its products offered on this website for inappropriate use and applications. Products should be tested for its suitability by prospective customers in all possible applications and conditions. Customers using or selling CWS products for use in other than recommended applications do so entirely at their own risk and agree to fully indemnify CWS from any damages arising or resulting from such use or sale.
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go towww.P65Warnings.ca.gov.
Any Comments, Suggestions or Questions? Contact us!
Email: sales@coilws.com
CWS
353 West Grove Ave. Orange, California 92865
Call us Toll Free: 1-800-679-3184 or 1 (800) 377-3244
Tel: (714) 279-9010,
Fax: (714) 279-9482
Copyright 2008, Coil Winding Specialist, Inc
Updated July, 2013
CAGE Code: 5DME2(Registered with www.ccr.gov)
